X-Wing Pilot Belt Harness

Accessories make the outfit, so in this segment of the Star Wars TFA Resistance X-Wing Pilot Costume tutorial, I’ll provide the steps and materials needed to make a screen accurate belt and harness along with an alternative option if you prefer to purchase a completed belt and harness instead.

X-wing pilot belt harness

To weather the belt I used small amounts of dark gray, black and brown acrylic paint, applied with a rag around the harness straps, belt edges and buckle area.You may need to register to view that area on their website, but the Rebel Legion forums are an excellent source for costume information and pieces for sale.[Scapegoat 8212 12 Dorororororo]

I ordered the referenced charcoal color webbing and painted the belt and straps with Medium Gray Duplicolor Fabric and Vinyl Spray Paint.After having to remove the harness from the belt at this location to attach my holster, I decided to add velcro to the inside of the belt and the harness loop.The tutorial is very detailed and contains all the information required to construct an accurate belt and harness, using basic sewing skills.For a thigh strap on the holster, like Poe’s costume in The Last Jedi, you will need about 3 feet of one-inch charcoal webbing.[New Of John Picks Anime TV Were What 2018s Ask Johns]

The belt I used came with a plastic buckle, so I had to order an additional roll pin buckle.However, with the alternate belt I was able to construct my belt, (for my 42″ waist size) using a single belt, instead of splicing two together, which saved some work.

X-wing Pilot harness screws

I also opted to use Chicago screws, as suggested in the tutorial, which I purchased from Tandy Leather.Since these screws only connect two pieces of webbing, this filled the extra space, and helped to keep them in place.[Altair No 2017 2 Part In First Made Welcome To Ballroom Compulsive Gambler Abyss Summer Shoukoku Anime The Impressions]

I made my belt and harness by following a great tutorial and parts list made by a member of the Rebel Legion forum.Since the paddles need to have a slight inward bend in them, I bent them by hand by just placing them on the edge of a counter and pushing them downward.I have also seen paddles made from plastic and finished with silver Rub N’ Buff that came out very nice.

X-Wing Pilot Belt

For my harness paddles I purchased a pair of machined aluminum ones from the Rebel Legion classifieds section.If you plan on adding a holster to your pilot costume, you will need to order about two feet of extra two-inch webbing.I substituted the listed belt for the same style belt from a different seller, as I had an issue with the eBay seller referenced in the Rebel Legion tutorial.[Seiyuu Shokugyou Reveals Sekaisaikyou De Arifureta 038 New Delayed Characters Anime Summer]

X-Wing Pilot Velcro Harness

The Rebel Legion tutorial suggests stitching the harness strap to the belt in the rear, so it stays in place.If you don’t sew or just don’t want to make your own belt and harness, a seller on Etsy currently sells TFA X-Wing Pilot belt and harness sets made in custom sizes.

DIY X-Wing Pilot

Check out the prior segments of the TFA Resistance X-Wing Pilot Costume Tutorial here:

Star Wars TFA Resistance X-Wing Pilot Costume: Part 1 – Helmet

Star Wars TFA Resistance X-Wing Pilot Costume: Part 2 – Flightsuit

Star Wars TFA Resistance X-Wing Pilot Costume: Part 3 – Gloves and Boots

Follow emeraldB.com and be notified of upcoming TFA Resistance X-Wing pilot costume tutorials including the blaster & holster, vest & chest plate, utility pouch, chest box & hose, and flares!

.I used a soldering iron to make the necessary holes in the harness webbing.Where the back strap connects around the belt, I also added a flat washer and a lock washer to each Chicago screw.[ Review 7039scarlet PC]
Source: https://emeraldb.com/2017/12/17/star-wars-tfa-resistance-x-wing-pilot-costume-part-4-belt-and-harness/

No comments yet. Be first to leave one!