All of my sewing is self taught; that means if I can learn to do it, you can too! Applique isn’t hard, it just takes practice and patience.Hopefully this tutorial will help you get started!
Satin Stitch Applique
Applique is a technique that uses different stitches to “apply” one piece of fabric to another.Any creases/wrinkles at this stage can be disguised a little by the applique to come!
STEP FIVE Time to start your applique! Satin stitch the edges! This can take 5 minutes or 5 hours depending on your design.Most sewing machines have a zigzag stitch you can adjust so it’s very accessible too – no fancy features or modes here! You can use it on any size design, on basic shapes or on complex patterns – the only limit is your imagination!
All three costumes shown above have had applique used for contrast detail, all in varying shapes and sizes!Â And as you can see Tales of costumes have a lot of trims and details so for this guide I will be using my Elize jacket from Tales of Xillia.Practice makes perfect!
If you like my work,Â you can support me on Ko-Fi!
Thank you for popping by! If you have any comments or questions, please feel free to contact me via any of my social media;
Facebook: exeliacosplay Instagram: exeliax Twitter: exeliax
The post Exelia’s Guide to Applique! appeared first on Exeliax.co.uk.
Once sewn, IRON YOUR FABRIC.Â Now the contrast fabric is glued and sewn down, iron it and make sure it is all smooth.Take your time and move the needle back and forth if needed.There are designs on the front and back, so they were made and cut separately.[NEW A Dance Reactive Make Skirt GUIDE Tutu Sparkle]
Depending on your design, you can either use an identical colour thread for a subtle edge or a contrast thread to make the trim stand out.Depending on wherever your applique is going (front, back, sleeves, etc), cut a copy in your contrast fabric.
Now your applique is finished, all that’s left is to finish the rest of the garment off!
STEP SEVEN Admire your work! Applique is time consuming and tiring but YOU DID IT!! All that effort really shows.This way it won’t look jaggy and misaligned.You can use a thinner or thicker stitch if you want, but I find 3mm usually looks tidy and covers all stitching/edges underneath comfortably!
ALWAYS test your stitch first, and make sure your machine can still feed the fabric when sewing rather than jamming – if the stitch length is too short sometimes it can chew the fabric or thread underneath.[Cosplay 2016 Championship National Madman Launched].The foot might not always sit straight but it will make the curve smoother when sewing.But you can use a longer stitch if you want to.Make it roughly the size you want it to be – but keep in mind once sewn it might grow around the edge by 1-2mm.Â My shapes are symmetrical so I made patterns from folded paper first.Fun times with the sewing machine ahead!
Things you will need:
- Sewing machineIron & ironing boardLOTS of matching threadBondawebFabricPaperPen/pencilScissorsIron-on interfacing (optional)
STEP ONE Pattern your garment and cut it out.Your design will look really wiggly and ugly right now.The design has a complex front and back, finished with a trim around the edge.Don’t worry about it being totally neat – your applique will cover this stitch.
For this guide I will be using satin stitch, a close stitch around the edge of a design.Creases or folds will affect how the applique sits.Â Once ironed, iron your bondaweb where you will need it on the fabric.Make sure your fabric is clean and ironed before you do anything else! You’ll need your contrast fabric for this part.In basic terms, it’s a close zigzag in a thin width that finishes the edge.[In Anime 03262019 Moments Hot Week039s This] STEP SIX IRON YOUR FABRIC.I also cut a copy for the lining. TIPS WHEN SEWING:
Make sure you take it SLOWLY and are precise with your sewing – it is a lot to unpick and redo and might damage your fabric if you make mistakes.Start from the “bottom” or “inside” edge when sewing – it makes any visible starting points much less distracting.When sewing corners, lift the foot and position the needle manually.Remove the backing slowly, make sure it is smooth and iron it on!
STEP SIX IRON YOUR FABRIC.I also cut a copy for the lining.
TIPS WHEN SEWING:
STEP FOUR Sew around the edge with a straight stitch.Â Bondaweb is great stuff, but it’s not always super secure, so sew it down first!Â I use a 2mm stitch to sew around the edge because it makes it easier to maneuver the fabric.Also, if your design is symmetrical, try and mirror your sewing to give it a cleaner finish.When sewing curves, turn the fabric gradually and lightly pull it as it turns.For this jacket, the front and back panels was needed and around the bottom edge, so I added bondaweb in parts to reduce waste.[Shouboutai Anime 6th Force Officially July Long Fire PV 038 Coming No Enen Releases]
Once your bondaweb is ironed on, transfer your design onto your bondaweb! The great thing about bondaweb is that you can draw on the removable side before you cut it out!Â Cut out your design and apply the bondaweb pattern to your garment.It’s easy to sew and when it’s done well it looks really clean, avoiding any fraying or uneven edges.
STEP THREE IRON YOUR FABRIC.With cosplay, it’s a great way to add fiddly details to a costume without using paint or embroidery.[Promised Demon Neverland The Evolution]
STEP TWO Pattern your applique design.Make sure you have LOTS of thread – Elize’s design used over 300m of thread (3 100m spools of Gutermann)! I would also recommend using the same thread for the top and bottom stitches – this makes the colour more solid around the edge.
Over on my Facebook page I asked if anyone would be interested in an applique tutorial, and you guys responded! So here it is!
I’ve used applique on costumes for years now, it’s one of my favourite techniques and it’s really satisfying to look at! Even though it’s time consuming I find it much easier than patterning and top-stitching bias for complex designs like those in the Tales of series.This will help the applique fit more accurately.Â If your applique is small, you might not need a full copy, but it can help you make sure it fits properly!
For this costume the trim follows all the way around the jacket, so I cut an exact copy of the front and back.Elize’s jacket took me around 3 hours to complete.Â When sewing Elize I used a 3mm zigzag width and 0.1mm length.Iron it carefully and smooth out any wrinkles or wiggles and it will look MUCH better!Â If you added some interfacing for stability, you can remove it now.[C2E2 Recap Badlands8217 The 8216Into]